Spinning from Raw Fleece

Last year while visiting my aunt in Saskatchewan I purchased a few ounces of raw fleece from a local yarn shop. This was my first time working with raw fleece, and I never got around to sharing my experience. The fleece is a Clun Forest/ Corriedale cross, and since I hadn’t worked with Clun Forest before, I decided to buy a few ounces as a souvenir. I’m not sure how much the characteristics of this fleece resemble pure Clun Forest, but I’ve recently purchased some Clun Forest Roving for one of my Shave ‘Em to Save ‘Em projects, and both have a certain spongy quality that is different than other wool types I’ve encountered.

My first adventure was figuring out how to get my purchase across the border. I learned that it is legal to send fleece across the border, but decided to mail the fleece home in case the TSA agents weren’t aware of this fact. I figured the postal inspectors know what they’re doing, but I was still a little bit nervous about it being confiscated.

Raw Clun Forest x Corriedale fleece

The fleece did arrive in the mail, however, and I set about washing and drying it. There was a fair bit of dirt and VM in the fleece, so I went through several soakings in plain water after the initial scouring with mild soap (I used Dr. Bronner’s unscented formula).

Washing the fleece
Locks post-washing

Once dried I decided to process the locks with my flick-carder. About half the fleece was leftover from this process, so I hand carded it to spin separately. I was finding it difficult to manage a short-forward draft, so after a bit of experimentation I settled on long-draw, which I used for both the flicked locks and the carded fleece.

A single lock
The final skeins. (L) Flick-carded, undyed. (R) Hand carded, dyed with avocado pits.

I’m pretty pleased with the finished result. The carded fleece had a few neps in it and so is a bit more irregular. The flick-carded yarn is fairly even and pleasantly bouncy, and the yarn took the dye well. I’m looking forward to spinning the Clun Forest roving I’ve bought so I can compare the two.

Spinning Teeswater

Recently I spun up a sample of Teeswater roving that I bought at SAFF a couple of years ago (from Gwyneth Glynn Longwools). Now that I have more experience with spinning, and especially on my wheel, I’m attempting to be a little bit more scientific about my breed sampling. Even though it’s not a combed prep, the small sample that I Andean plied had a bit of sheen to it, so I decided to spin it with a short forward draft to maximize the sheen. I aimed for a thickness that would match my other breed samples. The roving had a bit of grease left in it, and I found it a wee bit difficult to draft consistently.

The finished yarn does have a nice sheen, and a certain silkiness. I plan to use this sample to knit one of my hexagon blanket ‘squares’, but I could also see it being used as a weft yarn for weaving. The finished skein is 41 g/ about 65 yds at 14wpi and 2-3 twists per inch.