Spinning Romney and Finn

It’s been awhile since I’ve talked about spinning different sheep breeds. I got distracted by my spinning wheel, the Tour de Fleece (which I participated in for the first time with Three Waters Farm), and learning to weave. Phew!

Last year I was given a 1970s-era Ashford Traditional wheel that needed some TLC, and I finally got it fixed up a couple of months ago (the main difficulty being a rusted out, stuck hub pin). Since then I’ve been creating yarn at a rather alarming rate, though as I’m rather new to wheel spinning I’m not as good as with my spindles yet. So I’ve also continued to do some sampling on my spindles, and I can now compare my spindle spun and wheel-spun samples with different breeds.

I’ve actually got a bit of a backlog I’d like to tell you about, but I’ll start with some Finn and Romney. First up is some Finn roving from Heelside Farms that I talked about spindle spinning in my first spinning post. Finns are a primitive breed, and I’ve been enamored of their wool since I discovered Tukuwool yarns, which are a blend of Finn with a bit of Texel. The yarns have a faint sheen and depth that makes the colors really beautiful.

I had around 4 oz of the Finn minus that bit for previous sampling, so it was the first fiber I tried out on my new-to-me wheel. I found it fairly easy to spin on both the spindle and the wheel. I plied the wheel-spun tighter, which will make for a sturdier yarn, but the more softly plied spindle-spun yarn is pleasantly squishy. I love the natural gray-brown color, and the wheel-spun yarn does have a slight sheen, even with the more woolen preparation (I did a short forward draft on the wheel).

Finn Roving. Left: spindle-spun. Right: wheel-spun.

The second is one I’ve just finished – some Romney lambswool that I bought at SAFF last year. I decided to try spinning this one on my dealgan, which I hadn’t had much success with before. This time I did manage to create yarn. The dealgan doesn’t spin for very long until you build up a bit of a cop, and some of my early singles didn’t have quite enough twist, so I had some breakage when I went to ply. But I spit-spliced the broken ends and soldiered on.

Romney lambswool on a dealgan

Romney isn’t the softest of wools – it’s intermediate between the fine wools and longwool breeds, though usually grouped with the longwools. Having said that, I have a garter-stitch shawl knitted in Romney from farms in the western part of my state (from the now-defunct Fern Fiber), and it’s one of my favorite knits of all time. The Romney is in a natural gray plus a gray overdyed with weld, and it has a beautiful sheen and depth of color. And the garter stitch makes it nicely squishy. So I was eager to try the lambswool.

Romney lambswool, spindle spun

I can’t say it was my favorite fiber to spin with, but as lambswool the Romney is reasonably soft, and the chocolate brown color is lovely. I’ve since knitted up a hat (the Ljós pattern by Ysolda Teague) using the Romney and Finn along with some white Targhee and Corriedale that I dyed with pomegranate rinds.

Colorwork hat knit with Romney, Finn, Targhee and Corriedale wools.

I’m starting to discover which sheep breads I like working with best, and I’ve also started working with blends and dyed rovings, which is a big subject in and of itself. Much more learning and experimenting to come!

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.